Omnifloat Castors

Omnifloat Glass Handling Ball Castor Units

Low

Ball Transfer Units

Friction

Speed

Ball Transfer Units

3 feet/sec

Temperature

Ball Transfer Units

-5 to 300 °F

Orientation

Ball Transfer Units

Any

Delicate

Ball Transfer Units

Contact

Water

Ball Transfer Units

Resistant

Outdoor

Ball Transfer Units

Application

 

metric or imperial

 

Select SeriesPart NoLoad (lbs)Ball Ø "Pre-Load (lbs)Deflection (")Load at Max Deflection (lbs)A (")B (")C (")D (")E (")F (")Fixing Holes (PCD)G (")H (")Drain HolesWeight (lbs)2D/3D CAD or PDF
OF35-55 40   1.380   2.130   3.620   1.080   M14 x 1.5    
OF35-75 40   1.380   2.130   3.430   1.480   M14 x 1.5    
OF50-100 48   1.970   2.720   4.210   1.970   M14 x 1.5    

 

Choose the Ball material for your application:
=
Rubber Ball add suffix ‘R’
Better Grip (Black)
70 Shore ‘A’ -20⁰C to +80⁰C
=
Polyurethane Ball add suffix ‘P’
Wear resistant (Caramel)
92 Shore ‘A’ -20⁰C to +80⁰C
=
High Temperature add suffix ‘HT’
Heat resistant (Red)
Heat resistant (Red)
Stainless Steel Arm Upgrade
Corrosion/Chemical attack?
Specify Stainless Steel Arm (AISI 304)
Standard materials are zinc plated
steel arm (AISI 1113)
 
These strong & practical castors permit easy handling of sheet materials such as glass in wet, corrosive, dusty & high temperature conditions.
Omnifloats are typically supplied with a 50% mix of ‘left hand’ & ‘right hand’ swivel trail. We recommend fitting the castors in a regular alternate pattern to minimise bias & provide a neutral conveying plane.

Replacement balls available as spares. Alternative materials can be retro-fitted for extended durability & service.