Série MG - Unidades de transferência de esferas de encaixe simples

MG Series Medium Duty Ball Transfer Units

Alternar unidades de medida:

Peça	Carga (lb)Carga (kg)	Peso	Ø da esfera ″Ø da esfera (mm)	A	B	C	D	£ de	Arquivos
MG8	29 13	0.037 0.017	5/16" 8	0.709 ❋18 ❋	0.472 12	0.394 10	0.079 2	£2.88
MG10	55 25	0.062 0.028	1/2" 10	0.787 20	0.650 16.5	0.531 13.5	0.118 3	£6.85	PDF STEP
MG12	55 25	0.077 0.035	0.47 12	0.866 ❋22 ❋	0.689 17.5	0.551 14	0.118 3	£5.97	PDF STEP
MG15	132 60	0.108 0.049	5/8" 15	0.945 24	0.787 20	0.591 15	0.197 5	£8.11	PDF STEP
MG22	397 180	0.390 0.177	7/8" 22	1.417 36	1.201 30.5	1.024 26	0.177 4.5	£8.20	PDF STEP
MG30	772 350	0.739 0.335	1 3/16" 30	1.772 45	1.449 36.8	1.193 30.3	0.256 6.5	£10.62	PDF STEP
MG45	1323 600	2.073 0.940	1 3/4" 45	2.441 62	2.106 53.5	1.772 45	0.354 9	£29.86	PDF STEP
MG60	3308 1500	8.048 3.650	2 3/8" 60	3.937 100	3.051 77.5	2.402 61	0.650 16.5	£122.01	PDF STEP
MG76	5513 2500	18.963 8.600	3" 76	5.118 130	4.055 103	3.150 80	0.906 23	£268.76	PDF STEP
MG90	7718 3500	24.939 11.310	3 1/2" 90	5.709 145	4.528 115	3.543 90	0.984 25	£314.63	PDF STEP
MG8A	22 10	0.040 0.018	5/16" 8	0.709 ❋18 ❋	0.472 12	0.394 10	0.079 2	£5.36
MG10A	44 20	0.062 0.028	1/2" 10	0.787 20	0.650 16.5	0.531 13.5	0.118 3	£8.19	PDF STEP
MG12A	44 20	0.075 0.034	0.47 12	0.866 ❋22 ❋	0.689 17.5	0.551 14	0.118 3	£7.33	PDF STEP
MG15A	110 50	0.106 0.048	5/8" 15	0.945 24	0.787 20	0.591 15	0.197 5	£8.41	PDF STEP
MG22A	397 180	0.392 0.178	7/8" 22	1.417 36	1.201 30.5	1.024 26	0.177 4.5	£9.62	PDF STEP
MG30A	772 350	0.745 0.338	1 3/16" 30	1.772 45	1.449 36.8	1.193 30.3	0.256 6.5	£12.02	PDF STEP
MG45A	1323 600	2.139 0.970	1 3/4" 45	2.441 62	2.106 53.5	1.772 45	0.354 9	£35.51	PDF STEP
MG60A	2426 1100	7.916 3.590	2 3/8" 60	3.937 100	3.051 77.5	2.402 61	0.650 16.5	£132.62	PDF STEP
MG76A	3749 1700	18.963 8.600	3" 76	5.118 130	4.055 103	3.150 80	0.906 23	£315.55	PDF STEP
MG90A	5292 2400	24.939 11.310	3 1/2" 90	5.709 145	4.528 115	3.543 90	0.984 25	£368.42	PDF STEP
MG8D	11 5	0.035 0.016	5/16" 8	0.709 ❋18 ❋	0.472 12	0.394 10	0.079 2	£4.71
MG10D	11 5	0.049 0.022	1/2" 10	0.787 20	0.650 16.5	0.531 13.5	0.118 3	£9.42	PDF STEP
MG12D	11 5	0.060 0.027	0.47 12	0.866 ❋22 ❋	0.689 17.5	0.551 14	0.118 3	£7.34	PDF STEP
MG15D	22 10	0.077 0.035	5/8" 15	0.945 24	0.787 20	0.591 15	0.197 5	£8.53	PDF STEP
MG22D	44 20	0.309 0.140	7/8" 22	1.417 36	1.201 30.5	1.024 26	0.177 4.5	£10.70	PDF STEP
MG30D	55 25	0.551 0.250	1 3/16" 30	1.772 45	1.449 36.8	1.193 30.3	0.256 6.5	£18.28	PDF STEP
MG45D	55 25	1.610 0.730	1 3/4" 45	2.441 62	2.106 53.5	1.772 45	0.354 9	£52.69	PDF STEP
MG60D	Available in Standard and A only	Available in Standard and A only	2 3/8" 60	3.937 100	3.051 77.5	2.402 61	0.650 16.5	-
MG76D	Available in Standard and A only	Available in Standard and A only	3" 76	5.118 130	4.055 103	3.150 80	0.906 23	-
MG90D	Available in Standard and A only	Available in Standard and A only	3 1/2" 90	5.709 145	4.528 115	3.543 90	0.984 25	-
MG8SS	Inquire Inquire	Inquire Inquire	5/16" 8	0.709 ❋18 ❋	0.472 12	0.394 10	0.079 2	-
MG10SS	Inquire Inquire	Inquire Inquire	1/2" 10	0.787 20	0.650 16.5	0.531 13.5	0.118 3	-
MG12SS	Inquire Inquire	Inquire Inquire	0.47 12	0.866 ❋22 ❋	0.689 17.5	0.551 14	0.118 3	-
MG15SS	Inquire Inquire	Inquire Inquire	5/8" 15	0.945 24	0.787 20	0.591 15	0.197 5	-
MG22SS	Inquire Inquire	Inquire Inquire	7/8" 22	1.417 36	1.201 30.5	1.024 26	0.177 4.5	-
MG30SS	Inquire Inquire	Inquire Inquire	1 3/16" 30	1.772 45	1.449 36.8	1.193 30.3	0.256 6.5	-
MG45SS	Inquire Inquire	Inquire Inquire	1 3/4" 45	2.441 62	2.106 53.5	1.772 45	0.354 9	-
MG60SS	Inquire Inquire	Inquire Inquire	2 3/8" 60	3.937 100	3.051 77.5	2.402 61	0.650 16.5	-
MG76SS	Inquire Inquire	Inquire Inquire	3" 76	5.118 130	4.055 103	3.150 80	0.906 23	-
MG90SS	Inquire Inquire	Inquire Inquire	3 1/2" 90	5.709 145	4.528 115	3.543 90	0.984 25	-

Considere também

The MG series plain fitting medium duty ball transfer units are machined from solid steel & case hardened for wear resistance. Reinforced machined steel top cap to protect against impact from any misalignment of the conveyed item.

Lubrificado para maior durabilidade e zincado para resistência à corrosão. Materiais padrão; corpo e tampa AISI 1015, esferas AISI 52100. Os upgrades de aço inox 'A' e 'SS' apresentam esferas AISI420, resistência a choques e corpo. As esferas principais de ≥19 mm incorporam um feltro de vedação para restringir a contaminação.

Essa série apresenta um único orifício de drenagem. Fixação da placa de base.

Baixo atrito
1 : 0,002

Velocidade
1,5 m/seg

Temperatura
-30/+100ºC

Resistência a impacto

Orientação Horizontal / Para cima

Clipes tipo K e C

Os clipes de fixação compensam as irregularidades no furo e no diâmetro.
Ideal quando só é possível acessar um lado da superfície de montagem.

Serviço médio	Peça	Ø DO FURO MIN - MAX	A	£ de
MG15	K15	0.984 - 1.003 25 - 25.5	0.945 24	£0.67
MG15	C15	0.976 - 1.003 24.8 - 25.5	0.945 24	£0.91
MG22	K22	1.456 - 1.476 37 - 37.5	1.417 36	£0.78
MG30	K30	1.811 - 1.830 46 - 46.5	1.772 45	£1.09
MG30	C30	1.822 - 1.838 46.3 - 46.7	1.772 45	£1.42
MG45	K45	2.480 - 2.500 63 - 63.5	2.441 62	£1.53

Encaixe o clipe no orifício de montagem.
Push ball unit though clip.
Peripheral tags expand & grip the ball unit.

Clipe tipo K de aço

Grampo tipo C de aço

Other clips available.

Anilhas de ajuste

Compensam irregularidades no furo e no diâmetro.
Ideal quando só é possível acessar um lado da superfície de montagem.

Serviço médio	Peça	A	Bore Ø MIN - MAX	B	£ de
MG12	TR20	0.787 20	0.858 - 0.868 21.8 - 22.05	0.472 12	£0.54
MG12	TR22	0.866 22	0.937 - 0.947 23.8 - 24.05	0.472 12	£0.58
MG15	TR24	0.945 24	1.010 - 1.020 25.65 - 25.9	0.591 15	£0.60
MG22	TR36	1.417 36	1.488 - 1.496 37.8 - 38	0.472 12	£1.16
MG30	TR45	1.772 45	1.843 - 1.850 46.8 - 47	0.591 15	£1.17
	TR60	2.362 60	2.445 - 2.453 62.1 - 62.3	0.787 20	£1.21
MG60	TR100	3.937 100	4.085 - 4.096 103.75 - 104.05	0.787 20	£1.62